Feature

ETFE material is very light. The weight requirement of solar panel onthe top of the RV is relatively high. ETFE film is usually less than 0.20mm thick. When it is used as the packaging material on the surface ofsolar panels, the weight of solar panels will be greatly reduced. lt

greatlyreduces the load of the RV.

Good light transmittance is one of its advantages. The lighttransmittance of ETFE film can reach up to 95%, and it does not blockthe projection of ultraviolet and other light. The transparent points on itssurface can collect sunlight from different angles, and the fine layoutcan make secondary use of sunlight refraction to maximize theconversion of solar energy into electricity. Make full use of the sun whenthe weather is bad

Easy to use:
This product is a semi-flexible solar panelthat can be bent up to 30 degrees. It is suitable for mounted on an irregular smooth surfaces such as RV roofs, boats, tents, Yacht, vaulted roofs, etc.
High efficiency, Light weight:
Only 3mm thick, weight 1.1kg, easy to hang, disassemble and carry.
Easy to install:
Metal holes in the four corners of the product for fixing screws and mounting. Each solar panel has been tested several times.
The junction box in front of the solar panel has a Schottky diode built in to prevent reverse current.
The solar panel operates at 18V. Please purchase a solar controller to charge the battery.